Hydraulic Operated Elevator

BX, BXS-SLIP, SBX7, UX, H-SJH, ROTATOR

Designed for hydraulic actuated operation
Cost competitive and economic with normal rig complement of air-operated, drill pipe, drill collar and casing elevators.
Double door design for optimal balance and performance.
The hydraulic cylinders are located inside the body casting for clean lines and maximum protection, and yet they are accessible for normal maintenance.
Changeable bushings allow one elevator frame to handle all pipe size and type requirements.
Bushings are locked into place with spring loaded pins for quick, easy removal and installation.
Bushings can be changed within 5 minutes.
No special tools are needed, no loose nuts, bolts or pins.
Hinge journals are bushed to put major wear into replaceable components.
One door bushing is spring loaded with linkage connecting it to a locking pin. Any load on this bushing segment engages the pin preventing the elevator from opening. This safety lock prevents the elevator from opening under load.
Latch valve eliminates any faulty signals.
A trigger mechanism initiates the closing sequence when pipe is thrown into the elevator.
Additionally equipped with a rotary actuator and can be tilted to pick up pipe from the V-door, eliminating the need for single joint elevators.

Designed for hydraulic actuated operation.
Cost competitive and economic with normal rig complement of air-operated casing elevators.
Double door design for optimal balance and performance.
The hydraulic cylinders are located inside the body casting for clean lines and maximum protection, and yet they are accessible for normal maintenance.
Movable replaceable slips allow one elevator frame to handle multiple pipe sizes with no or very small external upset or load shoulder.
Easy slip exchange.
No loose nuts, bolts or pins.
The safety lock prevents the elevator from opening under load.
Latch valve will prevent any false signals
The elevator is prepared for an interlock system as an option when used with a power slip.
Additionally equipped with a rotary actuator and can be tilted to pick up pipe from the V-door, eliminating the need for single joint elevators.

The SBX7 elevator is a solid body elevator with one manually operated door for high loads up to 1,250 sTon / 1,133 Tonne.

The hydraulic UX single joint horizontal pick up elevator, is designed to pick up tubulars lying flat on a scaffold/raised support beam without having to lift the tubulars prior to closing the elevator.
The elevator is capable of lifting casing.
It will handle single joints of pipe straight from cantilever to off-line stand building system, and is used underneath the CRT350/500 casing running tool as for picking up tubulars from the V-door.
After picking up the pipe, the pipe weight is transferred to the top collar plate.
The jaws do not carry the vertical load.
The jaws are delivered in sets and cover the range from 4.1/2" - 14".
The top collar plates and bottom guides must be ordered separately.

Hoist joints and/or stands of tubulars (drill pipe, casing or tubing) during the stand building operations of the total CRT350.
Pick up single tubulars from the V-door or the catwalk (pipe deck) and hoist them into the derrick and vice versa.

Hydraulic actuated operation.
Strong, reliable, economic.
Single hydraulic line required for rotation, accumulator actuated return movement.
The hydraulic cylinder is located inside the body for clean lines and maximum protection.
No loose nuts, bolts or pins.
Easy adjustment of angle.
Safe and reliable picking up pipe from the V-door, eliminating the need for single joint elevators.