The NOV, National Oilwell Varco centrifugal pump line has proven to be the best centrifugal design for handling abrasive mud. World Petroleum Supply, Inc has found this pump line offers a broad selection of innovative features for a variety of routine, demanding, abrasive, and corrosive applications. These pumps are designed for a wide range of flow rates, from a few gallons per minute to thousands of gallons per minute. Unitization services and options compliment the centrifugal pump line.
Centrifugal pumps are available in a variety of engineered options:
Centrifugal Pump Offerings
The National Oilwell Varco Brands Centrifugal Pumps can be sold as Bare Pumps. Contact the World Petroleum Supple Sales Staff for complete details.
The Titan manual reset relief valves automatically snap to a full open position when the set pressure is reached. In addition, this relief valve comes equipped with a position release button that indicates, at a glance, whether the valve is open or closed. Find out more about the Titan Reset Valves at World Petroleum Supply, Inc.
Contact our Sales Team for more information on Tital Reset Relief Valves.
BRANDT agitators power the drilling industry with high-quality, time-proven mechanical agitation.
The skid mounted MA-RG agitator is compact, and its low profile reduces headroom requirements and provides more layout space on top of the tanks. The gearbox is a triple-reduction helical-bevel gear drive system that reduces the rotational speed of the motor to drive the impeller(s). Up to 95% mechanical efficiency helps reduce horsepower requirements.
Impellers are available with flat blades (radial flow), contour blades (axial flow), and canted blades (radial/axial flow). The impellers are sized according to tank volume and expected duty. Active mud system compartments—such as solids removal sections, mud mixing sections, and slug pits, which need a higher shear force to produce immediate mixing—are another consideration in impeller sizing.
Several types of shafts are offered. Mild steel shafts are cut to length and joined to the gearbox output shaft with a rigid coupling. Solid shafts are keyed at the bottom for impeller height adjustment. Hollow pipe shafts are available for deep tanks. They are supplied in flanged sections and bolted together, making them ideal for limited lifting height.
Contact your World Petroleum Supply representative for selection and size based on tank geometry for optimal mixing and suspension in each compartment.
BRANDT™ is the new benchmark for separation equipment available World Petroleum Supply, Inc. Magnolia, TX.
The BRANDT™ KING COBRA™ VENOM™ shale shaker basket’s patented Contour Plus™ design reduces the liquid pool depth to provide better conveyance of drilled solids across the screens. Configured for 0° at the feed panel and +5° on the remaining panels, the Contour Plus design minimizes basket angle elevation and achieves drier solids and increased screen life by decreasing the mud pool weight over the screens.
Unlike competitors’ shakers, our Constant-G Control™ (CGC) means the KING COBRA VENOM’s performance actually improves under loaded conditions. CGC is a patented technology that monitors and automatically adjusts motor speed to maintain optimal G-force depending on fluids and solids loading on the basket. Motor speed increases with load, so it’s G-force when you need it, reducing wear and tear on components and screens when loads are light.
With its reduced dimensions and weight, including 34.5-in. (876 mm) weir height with a 12-in. (305 mm) sump/skid, this shaker is able to be installed on a wide range of rigs. Offered with a variety of options that can be ordered initially or installed in the field regardless of original factory configuration, the KING COBRA VENOM shaker provides flexibility to meet changing needs.
VENOM screens eliminate the need for crown rubbers and offer improved solids conveyance and fluid throughput. A rugged and reliable screen wedge system is used to secure the screens. A pneumatic single-point deck-angle adjustment is a standard feature.
The BRANDT™ VSM 300 shale shaker delivers a dramatic increase in capacity through unique vibratory motion and screen deck layouts.
As the world's first balanced, elliptical-motion, low-profile cascade shaker, VSM 300’s use of integral secondary drying technology demonstrates our commitment to delivering cost-effective, environmentally responsible solutions to the oil industry. The VSM 300 is an extremely simple machine to operate, maintenance is minimal, and screen changing is carried out in 2 to 3 minutes by one operator.
Supplied in modular form, the VSM 300 can be assembled on-site to produce multiple units, thereby reducing installation time and costs. The proven shallow header tank system provides equal flow distribution across the shakers, even when multiple units are installed. The VSM 300 can also be retrofitted to VSM 100™ skids. This significantly reduces installation costs on rigs on which VSM 100 shakers are already installed.
The BRANDT™ LCM-3D In-Line 4-Panel Shaker minimizes fluid loss while enhancing cuttings dryness.
Enhancing cuttings dryness while reducing fluid losses with a low weir height and unique deck angles. The BRANDT™ LCM-3D In-Line shaker has over 33.4 ft2 (3.1 m2) of flat screening area, and its exceptional performance can be attributed to the unique features of the vibratory basket design. Detrimental drilled solids are removed with efficient linear motion.
The LCM-3D In-Line 4-Panel Shaker has been specially designed to reduce overall height when transporting rig tanks, as the shaker can remain on the tanks during rig moves. The unique front liquid discharge and integrated side-mounted Vibra-Motors help keep the overall height to a minimum of 45 in. (1.14 m).
The unit’s basket design mounts the feed end panel at 0° and the other panels uphill at +5° to minimize liquid pools and reduce undue weight on screens.
The sales team from World Petroleum Supply, Inc. will assist on the right Shale Shaker for the job!
Separate detrimental drilled solids from drilling fluid with an advanced shale shaker screen frame design and unique mesh combinations.
The BRANDT™ VENOM™ series shale shaker screens use an advanced frame design and unique mesh combinations to effectively and efficiently separate detrimental drilled solids from drilling fluid. VENOM series screens are designed to fit all COBRA™ and LCM series shale shakers.
Specifications and Dimensions
The Pinnacle (PNN) Series screens are designed to fit all COBRA, KING COBRA, and LCM-3D Series shale shakers. All Pinnacle series screens are API RP 13C compliant. Find out more at World Petroleum Supply, Inc.
The Pinnacle™ Series shale shaker screens use an advanced frame and supporting plate design, combined with specifically created wire cloth panel, to effectively and efficiently separate detrimental drilled solids while maximizing drilling fluid throughput.
*Based on third-party testing.
*Pyramid is a registered trademark of the Derrick Equipment Company.
Increase well performance, lower overall costs, and increase shaker screen life with the PXL Series available from World Petroleum Supply, Inc the leader in BRANDT™ NOV products.
The NOV BRANDT™ Premium X-tended Life (PXL) series shaker screens are designed to last longer, make cleaner cuts, and hold truer cut points at comparable API numbers than the previous multilayer screen designs of the last three decades.
PXL screens are the product of a new engineering methodology: computer-modeled shaker screen design. By providing a more stable frame and screen cloth throughout the service life of the shaker screen, the PXL Series offers truer cut points, improved solids removal, and higher flow capacity. Its innovative design enables screens to last longer than conventional shaker screens—in some cases up to eight times longer. The longer screen life and durability does not sacrifice its most important function of effectively separating solids and fluids for better overall solids control and drilling fluid performance.
PXL shaker screens are compatible with all BRANDT shakers and are compliant with API 13C RP (ISO 13501)
The BRANDT™ B-150, B-250 and B-400 derrick and stand mount rig blowers help disperse stale air and bothersome insects away from rig personnel and equipment. Each unit is engineered to meet all OSHA specifications for safety, as well as to ensure years of dependable performance and trouble-free service. Additionally, each BRANDT™ rig blower is powered by an explosion-proof, three-phase AC motor. The B-150 is also available with a single-phase motor. Contact the World Petroleum Supply Sales Staff for more on the B-150, B-250 and B-400 Rig Blowers.
The BRANDT™ BBS-3600 and BBM-4800 derrick and stand mount rig blowers help disperse stale air and bothersome insects away from rig personnel and equipment. Each unit is engineered to meet all OSHA specifications for safety, as well as to ensure years of dependable performance and trouble-free service. Additionally, each BRANDT™ rig blower is powered by an explosion-proof, three-phase AC motor. They are also available in ABS certified configurations. Contact the World Petroleum Supply Sales Staff on the BBS-3600 and BBM-4800 Rig Blowers.